scher.nl
← All projects Personal project · November 2026

Old laptop as a home server

A Dell laptop from 2013 sat unused in a cupboard. Now it runs Ubuntu Server day and night, with the Art Store for the TV, the daily Gmail triage and Claude Code on it. This is how it went, step by step.

Laptop from
2013
Memory
16 GB
Time taken
2 weeks
Ports open in router
0
At a glance

One laptop, three jobs

The laptop sits with its lid closed on a network cable. It runs the Art Store in Docker, the Gmail triage every morning and Claude Code, which I use to work on the server from my phone or laptop. When I am out, I reach it through Tailscale. The settings live in their own GitHub repo.

Overview of the home server The laptop with Ubuntu Server runs the Art Store in Docker, the daily Gmail triage and Claude Code. The Art Store sends art to the TV. A phone on the go reaches the server through Tailscale. The configuration lives in a GitHub repo. UBUNTU SERVER · DELL 2013 Art StoreDocker container Gmail triagedaily at 07:30 Claude CodeRemote Control Phoneon the go Tailscale TVThe Frame GitHubconfiguration PR
How it went

From dusty laptop to server in ten steps

Claude wrote the step-by-step plans, the scripts and the configuration, and worked out why things went wrong. I chose the hardware and the security rules, and typed every command that needed admin rights (sudo) myself.

  1. 1

    Check the specs first

    Claude

    A Dell Inspiron 7537 with an Intel i7-4500U (2 cores, 4 threads), 16 GB of memory and a 256 GB SSD. That is well above what Ubuntu Server needs, and enough for a handful of Docker containers. A low-power mini PC or a Raspberry Pi 5 was the alternative, but the laptop was already here.

  2. 2

    Install Ubuntu Server

    Ubuntu

    Ubuntu Server 26.04 LTS put on a USB stick with Rufus, the whole SSD wiped and installed with LVM and OpenSSH, without extra snaps. The installer used only 100 GB of the disk; later one command added the rest. Then Docker and Docker Compose from the official source.

  3. 3

    A GitHub repo for the configuration

    GitHub

    Every settings file on the server is in a private repo, with a note on where it belongs. The Restore section in the README rebuilds a fresh server the same way with a handful of commands. Claude proposes changes as a pull request; I merge them. Passwords and keys are never in it.

  4. 4

    Run the updates

    Ubuntu

    First everything was brought up to date. After that, Ubuntu installs security updates by itself every day. Regular updates and Docker I do by hand, and automatic restarts are off: I choose when the server is briefly away.

  5. 5

    A fixed IP address

    Router

    The server and the TV each got a fixed reservation in the router. That way everything finds each other again after a restart, without setting anything on the server itself.

  6. 6

    Keep running with the lid closed

    Claude

    Ubuntu now ignores the lid, and the screen turns off after a minute. Surprise: with the lid closed this Dell switches the wifi off hard, and that cannot be prevented. Claude found the cause; the fix was a network cable to the router. It is also faster (1 Gbps) and more stable. Wifi stays only as a backup.

  7. 7

    Battery out, for fire safety

    Safety

    A thirteen-year-old battery on the charger day and night, with no charge limit in the BIOS: I did not want that. The battery is out and handed in at a collection point. Then I checked that the processor does not slow down without a battery: still 2.7 GHz under load. Downside: in a power cut the server goes off at once. Ubuntu recovers from that and everything starts again by itself.

  8. 8

    Claude Code on the server

    Claude Code

    Claude Code runs on the server itself and starts by itself after a restart, with Remote Control. So I work directly on the server from the Claude app on my phone or laptop, instead of retyping commands. Without a password Claude may only install updates and read a few things; everything else with sudo I do myself.

  9. 9

    Tailscale, for the Art Store on the go

    Tailscale

    The Art Store has no login of its own, so it must never be open to the internet. Tailscale makes a private network between the server and my phone. On the go I open the Art Store by the server's name, from an icon on my home screen. Nothing is open in the router.

  10. 10

    Gmail triage moved over

    JevClaude

    The Gmail triage ran as a scheduled task on my Windows laptop, so only when that was on. Now a timer on the server starts it every morning at 07:30. The task on the laptop is paused.

Rules

House rules for a server at home

Watch out with Docker A Docker container with a published port can get past the firewall. That is why the Art Store stays inside the home network and Tailscale, and not open to the internet.
Under the hood

What is in it

PartChoice
HardwareDell Inspiron 7537 (2013), Intel i7-4500U, 16 GB, 256 GB SSD, power adapter only
SystemUbuntu Server 26.04 LTS, LVM, automatic security updates
NetworkCable (1 Gbps) with a fixed reservation in the router, wifi as backup
AccessSSH with a key from the home network, Tailscale on the go
AppsDocker and Docker Compose (Art Store)
Jobssystemd timers (Gmail triage daily at 07:30)
ManagementClaude Code with Remote Control, configuration in a private GitHub repo
What surprised me

Four things I did not expect

Try it yourself

What you need

An old laptop with at least 4 GB of memory and an SSD, an 8 GB USB stick, a network cable and a Claude subscription. Count on an afternoon for the installation and a few evenings to set everything up properly. In doubt about your battery? Take it out.

Updated 11 November 2026.